New products catalog
JESMONITE AC630
Jesmonite AC630 is an acrylic polymer modified, cement-based composite. It is a shrinkage-compensated material of low permeability and is durable in all conditions. Although it can be used for...
POXYGLASS SMALL CAST 2.0
-Transparent epoxy resin with U.V. filter for castings of up to 3cm.-Artistic-decorative occlusions and encapsulation of electronic components. -Resistant to scratches due to its great surface...
POXYGLASS MEDIUM CAST 2.0 (COLADAS MEDIANAS)
EPOPLAK 730
Epoplak 730 epoxy model boards This epoxy model board resists extremely high temperatures (up to 130ºC) and also has a very low coefficient of thermal expansion: even if it is subjected to high...
EPOPLAK 720
Epoplak 720 epoxy model boards This epoxy model board resists extremely high temperatures (up to 170ºC) and also has a very low coefficient of thermal expansion: even if it is subjected to high...
EPOPLAK 702
Epoplak 702 epoxy model boards This epoxy model board resists very high temperatures (up to 140ºC) and also has a very low coefficient of thermal expansion: even if it is subjected to high...
Best Sellers
MIXING CUPS
Regulated mixing glasses, made of very resistant and flexible plastic. They are very useful for making mixtures of products such as resins, gelcoats, silicones, etc. These vessels can be used...
SILCAST C-517 (ECONOMIC)
-Silicone for molds (condensation type or tin based).-Low viscosity, good fluidity and flexibility and good level of detail in the reproductions.-Manufacture of simple molds, in which it is not...
POXYGREY (TO MODEL)
- Putty compound. - Solvent-free. - Good chemical resistance and excellent mechanical properties. - Holds up to 200 ºC. and polymerizes under water. - As an adhesive, filler and sealer or as putty...
URECAST WHITE SLOW
· Rigid polyurethane resin ·Slow curing bicomponent resin (approx. 20 min.). · DOES NOT CONTAIN SOLVENTS · For the molding of pieces by casting in silicone molds. · For the reproduction of artistic...
DIPLAST-DUSTY (MONOCOMPONENT RESIN)
- Mono component acrylic resin - Mixed with water. - Its finish is ceramic, even its sound once hardened is very similar. - Ideal for Fine Arts as well as for working indoors, being totally...
ALGINATE LIFE FX 911 SLOW
· Alginate powder for the realization economical molds of a single reproduction.· Very used in Lifecasting techniques applying the product on the skin.· Use acrylic resin to make the positive·...
ALGINATE LIFE FX 900 FAST
· Alginate powder for the realization of quick and economical molds of a single reproduction.· Very used in Lifecasting techniques applying the product on the skin.· Use acrylic resin to make the...
COLORPAC (OPAQUE DYES)
Opaque dyes with high concentration of pigment. Formulated especially for the coloration of all types of resins. An excess of colorant in the mixture of any resin can get to prevent the catalysis...
MINERAL There are 6 products.
CABOSIL
Pure silica dioxide, presented in the form of highly volatile white powder that is used as a thixotropic agent (thickener) and provides a high viscosity to any liquid substance, whether resins,...
MICRALUMI (LIGHT FILLER)
Mixture of hollow and solid micro spheres, micro fibers and flakes and glass particles, presented in the form of very fine grayish powder. It is fundamentally used in the molding of plastic...
MICRAGLASS 100 (LIGHT FILLER)
Light mineral filler that adds volume and reduces the weight of the manufactured parts. It is mainly used with polyurethane, polyester and epoxy resins. Manufacture of lightweight putty.
MARMOLINA
Crushed marble mixed with Ca, presented as a compact white powder. Its function is to increase the volume of the casting resins, in pieces of little structural requirement, and at the same time to...
CALCIUM CARBONATE
Mineral filler for casting resins (mainly polyester resins, although it can also be valid for epoxy resins and even some polyurethane resins).It is mainly used to increase the volume of the...
copy of MICRALUMI (VOLUME FILLER)
Low moisture filler composed of aluminum hydroxide.Fire resistance of epoxy, polyurethane and polyester systems.Suggested Ratio Range:For castable products: 150 to 200 parts per 100 parts of resin.