- New
CARTRIDGE MIXER FOR THE COAT·GUN GUN
Mixers for CoatGun spray gun cartridgesMade of high quality plastic for excellent mixing of the product.Sold individually
- New
COAT·GUN PNEUMATIC SPRAY GUN
Pneumatic spray gun· Possibility of mixing 1 to 1, 2 to 1, 3 to 1, 4 to 1· To 750ml + 750ml cartridges· Requires minimum flow compressor 300l / min (power 3HP)· Fast in setup· Light and easy to use
- New
URESPRAY (POLIUREA PROYECTABLE)
Two-component polyurea with hardness 90 Shore APresented in a 750g A + 750g B cartridge· Gray· 43N / mm tear resistance· Elongation 184%· Excellent mechanical and thermal resistance (up to...
- New
copy of MICRALUMI (VOLUME FILLER)
Low moisture filler composed of aluminum hydroxide.Fire resistance of epoxy, polyurethane and polyester systems.Suggested Ratio Range:For castable products: 150 to 200 parts per 100 parts of resin.
- New
URECAST 4200 FAST
DOES NOT CONTAIN SOLVENTS· For the molding of parts by casting in silicone molds.· Reproduction of thumbnails in detail.· High surface hardness and good mechanical resistance.· Hardness: 70-75...
- New
URECAST COLOR
VERY IMPORTANT: CAREFULLY FOLLOW THE INSTRUCTIONS DETAILED ON THE PACKAGE· For the molding of parts by casting in silicone molds.· Reproduction of thumbnails in detail.· High surface hardness and...
Best Sellers
POXYGREY (TO MODEL)
- Putty compound. - Solvent-free. - Good chemical resistance and excellent mechanical properties. - Holds up to 200 ºC. and polymerizes under water. - As an adhesive, filler and sealer or as putty...
MIXING CUPS
Regulated mixing glasses, made of very resistant and flexible plastic. They are very useful for making mixtures of products such as resins, gelcoats, silicones, etc. These vessels can be used...
SILCAST 517 (ECONOMIC)
-Silicone for molds (condensation type or tin based).-Low viscosity, good fluidity and flexibility and good level of detail in the reproductions.-Manufacture of simple molds, in which it is not...
ALGINATE LIFE FX 900 FAST
· Alginate powder for the realization of quick and economical molds of a single reproduction.· Very used in Lifecasting techniques applying the product on the skin.· Use acrylic resin to make the...
ALGINATE LIFE FX 911 SLOW
· Alginate powder for the realization economical molds of a single reproduction.· Very used in Lifecasting techniques applying the product on the skin.· Use acrylic resin to make the positive·...
URECAST WHITE SLOW
- Slow curing bicomponent resin (approx. 20 min.). - DOES NOT CONTAIN SOLVENTS - For the molding of pieces by casting in silicone molds. - Reproduction of miniatures with detail. - High surface...
POXYGLASS 3D (3D PARTS COATING)
-Transparent coating for pieces made in all types of 3D filament-Easy to use-It is recommended to apply with a brush. -It can be sanded. -We recommend making 2 layers for a perfect finish....
POXYGLASS 1045 (SMALL CAST)
-Transparent epoxy resin with U.V. filter for castings of up to 3cm.-Artistic-decorative occlusions and encapsulation of electronic components. -Resistant to scratches due to its great surface...
FIBERGLASS MAT There are 6 products.
SURFACE VEIL
Fiberglass mat in continuous roll or cut per linear meter of very fine grammage (30grs / m2). Crosslinked fiberglass filaments, joined by a common binder. This type of fiber has been developed...
MAT 225
Fiberglass mat in continuous roll. Crosslinked fiberglass filaments, joined by a common binder. This type of fiber has been developed especially for the manufacture of pieces, molds and...
MAT 300
Fiberglass mat in continuous roll. Crosslinked fiberglass filaments, joined by a common binder. This type of fiber has been developed especially for the manufacture of pieces, molds and...
MAT 450
Fiberglass mat in continuous roll. Crosslinked fiberglass filaments, joined by a common binder. This type of fiber has been developed especially for the manufacture of pieces, molds and...
MAT 600gr/m2
Fiberglass mat in continuous roll. Crosslinked fiberglass filaments, joined by a common binder. This type of fiber has been developed especially for the manufacture of pieces, molds and...
CHOPPED STRAND
Chopped strand of fiberglass mat in 6mm format. of length. It is commonly used as a binder material for resins in which it is desired to increase the impact resistance of the same. filler for any...