- New
CATALOGUE OF PRODUCTS
· Catalog of Products in COLOR Din A4 format.· 48 pages with descriptions, photos and tables of all available products.· Perfect for consultation.ALL INCOME FROM THIS CATALOG WILL BE DONATED TO...
- New
URELAST 95 COLORLESS (FLEXIBLE RUBBER)
Two component polyurethane rubber- Mix in equal parts 100 A + 100 B- Colorless- High mechanical resistance- Perfect also for acrylic resins- Hardness 95 Shore A- Working time: 5 min- Curing time: 1...
- New
URELAST 60 COLORLESS (FLEXIBLE RUBBER)
Two component polyurethane rubber- Mix in equal parts 100 A + 100 B- Colorless- High mechanical resistance- Perfect also for acrylic resins- Hardness 60 Shore A- Working time: 12 min- Curing time:...
- New
URELAST 40 COLORLESS (FLEXIBLE RUBBER)
Two component polyurethane rubber- Mix in equal parts 100 A + 100 B- Colorless. - High mechanical resistance- Perfect also for acrylic resins- Hardness 40 Shore A- Working time: 25-35 min- Curing...
- New
URELAST 30 COLORLESS (FLEXIBLE RUBBER)
Two component polyurethane rubber- Mix in equal parts 100 A + 100 B- Colorless. - High mechanical resistance- Perfect also for acrylic resins- Hardness 30 Shore A- Working time: 25-35 min- Curing...
- New
POXYFILLER (CREAM PUTTY)
Epoxy putty to use with spatula. -Easily mix 2 to 1-Fine and soft texture-Cure in 5 hours-Easy to machine (sand, cut ...)-Hard when dry
- New
URECAST 3750 FILLED (MINERAL FILLED)
Two-component polyurethane resin with mineral filler.-High mechanical and thermal resistance-Easy to mechanize-Light blue finish-Working time: 4-5 minutes-Curing time: 30 minutes-Mix: 100 A + 15 B
- New
POXYGLASS 1033BC (BIG CAST)
- Transparent epoxy resin with U.V. filter.- Low viscosity- To make artistic castings with occlusions- To encapsulate electric components - High surface hardness- High gloss finish- Low exotherm-...
Best Sellers
ALGINATE LIFE FX 911 SLOW
· Alginate powder for the realization economical molds of a single reproduction.· Very used in Lifecasting techniques applying the product on the skin.· Use acrylic resin to make the positive·...
ALGINATE LIFE FX 900 FAST
· Alginate powder for the realization of quick and economical molds of a single reproduction.· Very used in Lifecasting techniques applying the product on the skin.· Use acrylic resin to make the...
POXYGLASS 1045 (SMALL CAST)
-Transparent epoxy resin with U.V. filter for castings of up to 3cm.-Artistic-decorative occlusions and encapsulation of electronic components. -Resistant to scratches due to its great surface...
DIPLAST (MONOCOMPONENT RESIN)
- Mono component acrylic resin - Mixed with water. - Its finish is ceramic, even its sound once hardened is very similar. - Ideal for Fine Arts as well as for working indoors, being totally...
POXYGLASS 3D (3D PARTS COATING)
-Transparent coating for pieces made in all types of 3D filament-Easy to use-It is recommended to apply with a brush. -It can be sanded. -We recommend making 2 layers for a perfect finish....
SILCAST 530 (STANDARD)
- Liquid tin silicone (condensation) - Good fluidity and flexibility and very good level of detail in the reproductions.- To obtain long series of reproductions.- Recommended to make polyester...
URECAST 4100 SLOW
- Slow curing bicomponent resin (approx. 20 min.). - DOES NOT CONTAIN SOLVENTS - For the molding of pieces by casting in silicone molds. - Reproduction of miniatures with detail. - High surface...
POXYRESIN 1050 (AQUARIUMS AND TERRARIUMS)
-Epoxy resin to laminate pieces that will be submerged in water (aquariums) or in contact with animals (terrariums).-Fabrication of water drums-Mix proportions: 100:50-Working time: 60 min-Curing...
RESINS There are 42 products.
ACRYLIC ONE (RESINA ACRÍLICA)
BICOMPONENT ACRYLIC RESIN - Ecological and non-toxic resin - Solvent-free product - No shrinkage - Fire resistant - High hardness- Color: off white Mixture: 2 parts of powder per 1 of liquid -...
DIPLAST (MONOCOMPONENT RESIN)
- Mono component acrylic resin - Mixed with water. - Its finish is ceramic, even its sound once hardened is very similar. - Ideal for Fine Arts as well as for working indoors, being totally...
EPOXI SUPER SAP (LAMINATIONS)
-Clear epoxy resin with U.V filter-For laminations and coatings in fiber glass, carbon fiber...-Sustainable resin (up to 25% from organic waste from manufacturing process)-Low viscosity-High...
GELCOAT
-Polyester Gelcoat for fiber glass molds.-High viscosity paint with polyester resin base-Use with spray gun or brush (must be diluted with monomer styrene)-Has to be applied in the interior of the...
PLASTICRETE (STONE-LIKE FINISH)
- Two-component acrylic system based on ecological resin + mineral filler.- Its grayish color makes it very suitable for reproductions of stone simile.- Especially suitable in the field of fine...
POLYESTER RESIN (ECONOMIC)
LAMINATION. Polyester resin for fiberglass laminates. - Accelerated (incorporates cobalt accelerator). - Orthophthalic resin - Thixotropic (low viscosity). - In vertical applications, it is...
POLYESTER TOPCOAT
-Topcoat with polyester base for coatings in molds of fiberglass.-High viscosity paint -Can be applied with brush or spray gun (has to be diluted with Monomer Styrene)-High gloss finish-Mix: 1-2%...
- New
POXYFILLER (CREAM PUTTY)
Epoxy putty to use with spatula. -Easily mix 2 to 1-Fine and soft texture-Cure in 5 hours-Easy to machine (sand, cut ...)-Hard when dry
- New
POXYGLASS 1033BC (BIG CAST)
- Transparent epoxy resin with U.V. filter.- Low viscosity- To make artistic castings with occlusions- To encapsulate electric components - High surface hardness- High gloss finish- Low exotherm-...
POXYGLASS 1045 (SMALL CAST)
-Transparent epoxy resin with U.V. filter for castings of up to 3cm.-Artistic-decorative occlusions and encapsulation of electronic components. -Resistant to scratches due to its great surface...
POXYGLASS 3D (3D PARTS COATING)
-Transparent coating for pieces made in all types of 3D filament-Easy to use-It is recommended to apply with a brush. -It can be sanded. -We recommend making 2 layers for a perfect finish....
POXYGREY (EPOXY PUTTY)
- Putty compound. - Solvent-free. - Good chemical resistance and excellent mechanical properties. - Holds up to 200 ºC. and polymerizes under water. - As an adhesive, filler and sealer or as putty...
