RESINA PALATAL P4-01 (POLYESTER FOR CASTING)
-Low viscosity-Suitable for silicone mold castings-Perfect to mix with mineral o metallic fillers-Catalyst: Mek peroxide-Has to be mixed with the cobalt accelerator with 0,3% (3g/Kg) -Working time:...
POLYESTER TOPCOAT
-Topcoat with polyester base for coatings in molds of fiberglass.-High viscosity paint -Can be applied with brush or spray gun (has to be diluted with Monomer Styrene)-High gloss finish-Mix: 1-2%...
URECAST 3760 METAL (METAL FILLED-HIGH...
Two-component polyurethane resin with metallic filler.-High thermal resistance-Easy to machine-Gray-aluminum finish-Working time: 4-5 minutes-Curing time: 30 minutes-Mixing: 100 A + 15 B
UREFEX 50 (LOW DENSITY)
-Flexible bicomponent polyurethane foam (foam rubber type) for reproductions in silicone mold.-Good level of detail.-Molding of volumetric pieces.-Creation of props, animatronics, stop-motion...
URELAST 30 COLORLESS (FLEXIBLE RUBBER)
Two component polyurethane rubber- Mix in equal parts 100 A + 100 B- Colorless. - High mechanical resistance- Perfect also for acrylic resins- Hardness 30 Shore A- Working time: 25-35 min- Curing...
- New
URECAST AMBER (PIGMENTABLE)
Pigmentable fast polyurethane resin. - Fast curing bicomponent resin (approx. 10 min.). - DOES NOT CONTAIN SOLVENTS - For the molding of pieces by casting in silicone molds. - Reproduction of...
UREGLASS 8085 FAST (WATER CLEAR)
DON'T USE IN CONDENSATION SILICONE MOLDS -Excellent transparency and resistance to U.V. -Molding of pieces by casting in great detail. -High surface hardness and good mechanical resistance. -Not...
POXYFILLER (CREAM PUTTY)
Epoxy putty to use with spatula. -Easily mix 2 to 1-Fine and soft texture-Cure in 5 hours-Easy to machine (sand, cut ...)-Hard when dry
New
- New
SILGOM 738 CLEAR (PROTOTYPING)
POLIADITION. - Silicone of very low viscosity (platinum based)- Great flexibility- High mechanical resistance and high level of detail in the reproductions.- Its translucency allows to see through...
- New
URECAST AMBER (PIGMENTABLE)
Pigmentable fast polyurethane resin. - Fast curing bicomponent resin (approx. 10 min.). - DOES NOT CONTAIN SOLVENTS - For the molding of pieces by casting in silicone molds. - Reproduction of...
- New
copy of RELEASE AGENT SPRAY Z-25
Wax in spray. It allows to obtain multiple demouldings. Formulated based on self-diluted waxes diluted with aliphatic hydrocarbons. It offers a total release guarantee for polyurethane and epoxy...
Popular Products
URECAST 3750 FILLED (MINERAL FILLED-HIGH...
Two-component polyurethane resin with mineral filler.-High mechanical and thermal resistance-Easy to mechanize-Light blue finish-Working time: 4-5 minutes-Curing time: 30 minutes-Mix: 100 A + 15 B
POXYGLASS 1045 (SMALL CAST)
-Transparent epoxy resin with U.V. filter for castings of up to 3cm.-Artistic-decorative occlusions and encapsulation of electronic components. -Resistant to scratches due to its great surface...
URELAST 30 COLORLESS (FLEXIBLE RUBBER)
Two component polyurethane rubber- Mix in equal parts 100 A + 100 B- Colorless. - High mechanical resistance- Perfect also for acrylic resins- Hardness 30 Shore A- Working time: 25-35 min- Curing...
UREFEX 50 (LOW DENSITY)
-Flexible bicomponent polyurethane foam (foam rubber type) for reproductions in silicone mold.-Good level of detail.-Molding of volumetric pieces.-Creation of props, animatronics, stop-motion...
POXYRESIN 1018 (ALTA TEMPERATURA)
-Epoxy resin for fiber glass, carbon fiber.-Low viscosity and easy impregnation in fibers -It is possible to add Cabosil to thicken the product-High strength to high temperatures (up to 120ºC).-Mix...
URECAST 3760 METAL (METAL FILLED-HIGH...
Two-component polyurethane resin with metallic filler.-High thermal resistance-Easy to machine-Gray-aluminum finish-Working time: 4-5 minutes-Curing time: 30 minutes-Mixing: 100 A + 15 B
GELCOAT
-Polyester Gelcoat for fiber glass molds.-High viscosity paint with polyester resin base-Use with spray gun or brush (must be diluted with monomer styrene)-Has to be applied in the interior of the...
URELAST 60 COLORLESS (FLEXIBLE RUBBER)
Two component polyurethane rubber- Mix in equal parts 100 A + 100 B- Colorless- High mechanical resistance- Perfect also for acrylic resins- Hardness 60 Shore A- Working time: 12 min- Curing time:...